201- MTL / COT GRINDING MACHINE (Manual - Textured - With Laser Measurement)
MACHINE RUNNING PERFORMANS INFORMATION
Cot Grinding Capacity:
45 x 65 x 34 mm (Barmag Cot) 250 pieces/hour
Surface Roughness Sensitivity:
Ra < 1,2
Minimum Grinding Diameter: 20 mm
Maximum Grinding Diameter: 100 mm
Maximum Length of the Piece to be Grinded: 600 mm.
MACHINE TECHNICAL INFORMATIONS
Invertor controlled center motor.
Invertor controlled linear sliding sledge system.
Grinding stone motor.
Touch screen panel HMI 7 inch.
PLC automation systems.
The advanced grinding stone for cot grinding
Dust suction cyclone, cot keeping and stone grinding adapters.
Diameter Measuring System With Laser; it measures the outer diameter of the cot which will be grinded and eliminates the diameter measuring work of the operator by saving time and labour.
Automatic Grinding System; after placing of cot and pushing the start button, the pneumatic center closes and provides quick grinding which corresponds to a predetemined amount of pass.
Touch Screen Control Panel; it provides an easy possibility to adjust the control of the machine according to the request such as the amount of pass which will be removed from the surface of the cot, the running speed, the revulation of center, the time of shinning of the stone.
Invertor Controlled Center, Bank System; it provides an easy determination of the running speed and center revolution which is required for obtaining the desired cot surface smoothness (Ra) depending on the cot hardness and the yarn count.
PLC Automation System; it provides a possibility of personalization of all working adjustments.
Stop-Start System; the grinding stone stops while the operator place the cot. The stone start to revolve after pushing the start button. It provides a work safety and power saving.
Low Electricity Consumption; it provides an economical working possibility.
Production in Turkey; this provides fast service and spare part supply and efficient working.