COT MOUNTING PRESSES
Pneumatic
COT MOUNTING PRESS
Mounting of roving and ring spinning cots on the rollers are done by means of a pneumatic cot mounting press. Cot centering pin provides a controlled and safe using possibility together with progress speed limiters. It is provided together with dismounting and mounting adapters.
Height
Width
Depth
Weight
910 mm
300 mm
450 mm
38 kg
Cots for ring frame, roving frame and open end spinning machine.
Cots for ring frame, roving frame and open end spinning machine.
Manual
COT MOUNTING PRESS
It is used for mounting of ring spinning, roving and open-end spinning cots to rollers. It provides an economic solution. It provides a controlled process through cot centering pin. It is provided with suitable dismounting and mounting adapters which suit to your cot roller.
Height
Width
Depth
Weight
650 mm
370 mm
280 mm
40 kg
Hydraulic
DRAW FRAME COT MOUNTING PRESS
It is used for dismounting and mounting of draw frame, combing machine and lab cots. A controlled mounting process is achived in speed with a constant acceleration by means of a hydraulic system. It is provided with suitable dismounting and mounting adapters which suit to your roller dimensions.
Height
Width
Depth
Weight
1.000 mm
1.700 mm
360 mm
215 kg
Hydraulic
Cots for Long Stable Spinning and Texturizing Systems
It is used for de-mounting and mounting the top rollers in to cots for Texturizing , Long Stable and Fancy Yarn Spinning Systems.
By hydraulic system, the mounting operation is executed in a stable momentum, keeping the progress under control.
The adaptors suitable to the top rollers in the factory are supplied together. The cots centering bar enables a precise application undercontrol.
Height
Lenght
Width
Weight
1.800 mm
600 mm
600 mm
120 kg
COT TYPE
