401-SF&M COTS GRINDING MACHINE
SMART FEEDİNG SYSTEM & TWO INDEPENDENT GRINDİNG UNITS
This is the cots grinding machine with it’s fully automated and high performance features with two independent grinding units.
Labour free operation with it’s smart system.
Touch Screen Control Panel; It provides to
manage the whole process by allowing very
easy setting input for the several parameters
like the grinding amount on the cots’ surface,
traverse speed, the rotation speed of cots
holding bar, polishing period and the others
in accordance with the maintenance team
decision on the setting value. Additionally, it
offers the option in language setting.
Automation System Controlled by PLC;
enables tailor-made settings for all elements.
The Independent Grinding Unit for the long cots for draw frames and combers; the independent grinding unit with narrow stone design offers ideal long cots grinding for draw frames and combers.At the same time, the grinding on short cots for ring spinning frames and/or roving frames goes on in automatic process.”
The Smart Feeding System with Magazine;
it offers the comfort in loading big no.of top
rollers in to the specially designed feeding
unit just by pouring off, at once, instead of the
manual,time consuming work of alligning them
in to the magazine. It makes the operation very
easy for the users and provides grate saving in
time and labour.
Cots’ Diameter Measuring System by Laser;
by measuring the outer diameter of the cots
to be processed it maintains to perform the
grinding at the range of the outer diameter
determined. The cots with the diameter
smaller or bigger than the dimension range
determined are separated automatically. Since
the separation is done before the grinding
section of the machine the productivity of the
machine is not affected.
Automatic Grinding System; It offers
significantly high efficient performance with
it’s magazine type feeding system by fully
automated grinding process from beginning to
the end, allowing the operator to do the other
19x32x29 mm 350-450 mil/saat
GRINDING SENSITIVITY: 0,02
SURFACE ROUGHNESS: Ra < 1,2
Min. Grinding Diameter: 24 mm
Max. Grinding Diameter: 40 mm
Cots’ diameter measuring system by laser.
Top roller rotating motor with servo control.
Linear sliding cradle traverse system by servo control.
Grinding stone motor with inverter control.
Control panel with HMI 8 inch touchmatic screen.
Automation system controlled by PLC.
Grinding stone with enchaced structure for rubber cots grinding
Suction unit, top roller holding and stone grinding apparatus.
2.INDEPENDENT GRINDING UNITS PROCESSING RANGE
MIN. GRINDING DIAMETER: 24 mm
MAX. GRINDING DIAMETER: 100 mm
MAX. GRINDING LENGTH : 450 mm