201- AF&M / COT GRINDING MACHINE
(With MagazineType Feeding System & Two Independent Grinding Units)

While the grinding on the short cots for ring spinning frames and roving frames is automatically processed by the grinding unit with magazine type feeding system , at the same time, in simultaneous and continuous process , on the 2nd grinding unit with narrow stone the ideal grinding is applied on long cots for draw frames and combers, independently. By that, it is a multi functional , economical cots grinding machine.

201afm.png

The Feeding System with Magazine; high loading capacity for 72pcs top rollers (arbours) by magazine, it makes the operation very easy for the users.


Automatic Grinding System; It offers significantly high efficient performance with it’s magazine feeding system by the fully automated grinding progress from beginning to the end, allowing the operator to do the other jobs, meantime.


2nd Independent Grinding Unit for the long cots for draw frames and combers; the independent grinding unit with narrow stone design offers ideal grinding on long cots for draw frames and combers.At the same time, the grinding on short cots for ring spinning frames and/or roving frames goes on in automatic process.


Touch Screen Control Panel; It provides to manage the whole process by allowing very easy setting input for the parameters like the grinding amount on the cots’ surface, traverse speed, the rotation speed of cots holding bar, polishing period and the others in accordance with the maintenance team decision on the setting value. 

The System Controlled By Inverter On Grinding Stones, Cots Holders and Processing Table; provides flexibility in setting the rotation speed of grinding stones , cots holders and the traverse period to maintain the cot’s surface roughness (Ra) value targetted in accordance with the yarn count produced and the cot’s hardness.


Automation System Controlled by PLC; enables tailor-made settings for all elements.

Made in Turkey
 

201AFM5.jpg

Two HMI Control Panels

201afm_3.jpg
201AFM.jpg

2nd Independent Grinding Units

MACHINE WORKING PEFORMANCE REFERENCES

GRINDING CAPACITY:

19 x 32 x 29 400 top rollers (arbours) / hour

GRINDING SENSITIVITY SURFACE ROUGHNESS

*Ra  0,5 - 1,0 µm (*that may vary depends on the cots’ surface properties.)

WORKING PARAMETERS ON LONG COTS PROCESSING SECTION

MIN.GRINDING DIAMETER: 24 mm

MAX.GRINDING DIAMETER: 100 mm

MAX.GRINDING LENGTH: 400 mm.

WORKING PARAMETERS ON SHORT COTS PROCESSING SECTION

MIN.GRINDING DIAMETER: 24 mm

MAX.GRINDING DIAMETER: 40 mm (optional 51mm)

MAX.GRINDING LENGTH: 150 mm.

TECHNICAL FEATURES

  • Cot holder’s motor controlled by inverter.

  • Linear sliding cradle traverse system by inverter control.

  • Grinding stone motor with inverter control.

  • 2 sets Control panel with HMI 8 inch touchmatic screen

  • Automation system controlled by PLC.

  • Grinding stone with enchased structure for rubber cots grinding

  • Suction unit, top roller holding and stone grinding apparatus

  • The ability of grinding short cots for ring spinning frames and roving frames and long cots for draw frames and combers at the same time, in simultaneous and continuous process.

Height

Width

Depth

Weight

2.030  mm

1.600  mm

2.500 mm

1.350  kg

Phone: +90 212. 875 11 00  |  Fax: +90 212 875 11 06

©  2015  |  Asteks Kauçuk ve Plastik San. Tic. A.Ş.

Design: